Custom vanities make the most of Bendigo bathrooms that don't suit off-the-shelf sizes, from small ensuites carved out of old cottage bedrooms to double vanities in new family homes. The cabinet maker builds the vanity, and a licensed plumber handles the connections.
We're an enquiry service, not a workshop: Bendigo Cabinet Makers doesn't make or fit vanities. With your consent your enquiry goes to one independent local cabinet maker, who sets the price and contracts with you. Treat this page as general information only.
What's involved
- Planning drawers around the plumbing so storage isn't lost to the trap.
- Deciding on a top-mounted, under-mounted or integrated basin.
- Working out the vanity height for the people using it, which is often higher than older stock units.
- Adding a shaving cabinet or tall cupboard to match the vanity.
Bathroom vanities in Bendigo homes
When a bathroom in an older Bendigo house is renovated, plumbing often ends up in a slightly odd spot. A custom vanity can be built around it rather than moving pipes. Wall-hung vanities need solid backing in the wall, so plan them while the walls are open. Choose moisture-resistant board and sealed edges, especially in ensuites without much ventilation.
Price factors
- Basin and tapware, which may be supplied by you or the cabinet maker.
- Plumbing connections by a licensed plumber.
- Finish: laminate, 2-pac, veneer or solid timber.
- Matching shaving cabinet or tall cupboard.
Typical published prices are in our Bendigo cabinetry cost guide.
Checks before you sign
- Ask if the quote covers removal of the old vanity and any patching behind it.
- Remember: all plumbing connections must be done by a licensed plumber, and any wiring by a licensed electrician.
- For jobs above the value threshold, ask for a registration number and look it up with the Building and Plumbing Commission (thresholds are on the home page).
Choosing the right vanity for the room
The first decision is how the vanity sits:
- Wall-hung units float above the floor. They make a small ensuite feel bigger and are easy to clean under, but need strong fixing into noggins or masonry.
- Floor-standing units on a kickboard or legs are simpler to fix and suit older homes where the floor dips.
- Semi-recessed or above-counter basins change how deep the cabinet needs to be. A basin that sits on top lets you use a shallower cabinet with more drawer space.
Measure the walkway in front of the vanity, as well as the wall. A deep vanity in a narrow bathroom can make the door hard to open.
Bathrooms in older Bendigo homes
In many Bendigo cottages, the bathroom was added later, sometimes in an enclosed verandah or a converted bedroom. Walls can be out of plumb, floors can slope, and the plumbing may come through the floor rather than the wall. A cabinet maker can scribe the vanity to the wall, set it level on adjustable legs, and cut the back or base to suit wherever the waste comes in. If you're keeping an older floor, tell them before the measure.
Materials for a wet area
Use moisture-resistant board with every edge sealed. Laminate and polyurethane doors are the most common. Timber veneer works if it's well finished, and the inside of the cabinet is sealed too. For the top, the options include laminate, timber, natural stone and porcelain. Engineered stone has been banned in Australia since 1 July 2024 (Safe Work Australia: engineered stone ban).
Plumbing and waterproofing
The basin, waste and taps are connected by a licensed plumber, and new plumbing work in Victoria has to be done or supervised by a licensed or registered plumber. If the vanity is part of a full bathroom renovation, the waterproofing goes on before tiling and the vanity goes in after. The plumber needs to know the basin and tap heights before the wall is tiled.
Price guide
Budget vanities start near $350 on hipages' national figures, high-end custom ones pass $2,000, and paying a professional to fit one costs $50 to $100 an hour for what's usually a three-to-eight-hour job (hipages: vanity installation costs (updated 23 Jan 2026)). Plumbing is extra. A made-to-measure vanity costs more than one off the shelf but fits the room and the plumbing exactly.
Frequently asked questions
Can I reuse my existing basin and tapware?
Usually, as long as the sizes are known before the vanity is built. Give the basin dimensions or model in your enquiry.
Wall-hung or floor-standing?
Wall-hung makes cleaning easier and the room feel bigger, but needs solid wall backing. Floor-standing gives more storage.
Can I get a double vanity in a small Bendigo bathroom?
Double basins usually need about 1.5 metres of wall or more. In a smaller room, one wide basin with two taps, or a single basin with a long bench beside it, is often more practical.
Will a timber vanity crack in Bendigo's dry summers?
Solid timber can move with the swing from humid winter mornings to dry summer afternoons. A well-sealed finish on every face, or timber veneer on a stable board, keeps the risk down.
Send an enquiry
Ready for a quote? Send your suburb, a short description and any photos or sketches through the enquiry form. For the full range of jobs, go back to Bendigo cabinet makers.